1. Home
  2. /
  3. Switch gear
  4. /
  5. Contactor
  6. /
  7. AX12 -30 -10 -80

AX12 -30 -10 -80

A 12 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The A series 1-stack 3-pole contactors are of the block type design. – Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks – Control circuit: AC operated with laminated magnet circuit – Accessories: a wide range of accessories is available.

Watch Video link – Click Here
Download Datasheet – Click Here

Category: Contactor, Switch gear
Number of Main Contacts NO3
CompatibilityAX Contactors
Max Electrical Switching FrequencyAC-1 600 cycles per hour
Conventional Free-air Thermal Current (Ith)acc. to IEC 60947-4-1, Open Contactors q = 40 °C 125 ampere
Terminal TypeScrew Terminals
Rated Operational VoltageAuxiliary Circuit 690 volt
Operate TimeBetween Coil De-energization and NC Contact Closing 7 14 millisecond
Rated Control Circuit Voltage (Uc)50 Hz 230-240V
Rated Operational Current AC-3 (Ie)(220 / 230 / 240 V) 55 °C 65 ampere
Rated Operational Current AC-1 (Ie)(690 V) 40 °C 115 ampere
Rated Frequency (f)Auxiliary Circuit 50 / 60 hertz
Number of Aux Contacts NO1
Number of Aux Contacts NC0
Rated Short-time Withstand Current (Icw)at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 650 amp
Product Width44 millimeter
Product Length74 millimeter
Product Height74 millimeter
Invoice DescriptionAX12 -30-11-88 230-240V50Hz/240V-260V60Hz Contactor
Product RangeA Contactors
Package Gross Weight0.34 kilogram
Extended Product TypeAX12-30 -10 -80
General Use Rating UL/CSA(600 V AC) 90 ampere
Full Load Amps Motor Use(120 V AC) Single Phase 56 ampere

Related Products

Menu